How to solve the Windows 10 blue screen of death stuck at 100% complete and the computer doesn’t respond?

Rate this [Post ]

The blue screen death issue is one of the common issues that almost every Microsoft Windows user experiences today or tomorrow. This is really an annoying issue when turning on your PC, and a blue screen death error occurs and is stuck at 100%.

 

It is tough to troubleshoot the specific cause of the BSoD error, but not impossible. Thus, we are here with this article on how to solve the Windows 10 blue screen of death stuck at 100% complete and the computer doesn’t respond.

 

We will discuss and provide resources according to the blue screen error codes. So, stay tuned with us and read the article carefully.

What does a Blue Screen mean on Windows?

 

In Windows 10, Windows 11, the term Blue screen death” is known as a “fatal error” or “Stop error.” It occurs when the Windows has run into some problems that have stopped it from performing safely.

 

Your Windows PC shows a blue screen with a hexadecimal error code and information about the error when it occurs. After that, it automatically restarts your Windows PC. It can happen for many causes, including outdated drivers, incompatible software, and hardware issues.

 

If the blue screen issue occurs one or two times, it’s not an issue. But if you face this issue frequently, it can become a critical issue.

 

 

 

How to solve the Windows 10 blue screen of death stuck at 100% complete

 

 

What causes your pc ran into a problem and needs to restart stuck at 100%?

 

There may be many reasons behind your pc running into a problem and needing a restart. We have sorted out some common causes of the “Your PC ran into a problem and needs to restart” error. Check out these below-

 

  • Registry files may have been deleted from the “System32” folder in the OS partition.

 

  • The PC uses an excessive RAM percentage, more than Windows allows.

 

  • Systems errors such as the BSoD (BAD_SYSTEM_CONFIG_INFO).

 

  • Issues with the Registry or hardware malfunctions.

 

  • Corrupted system file.

 

  • Overheating issues.

 

  • Virus infections.

 

  • Forced shut down.

How to fix a blue screen of death stuck at 100%?

 

There are several fixes to the blue screen error stuck at 100%. This part of the article will discuss the five ways to eliminate the “Your PC ran into a problem and needs to restart stuck at 100%” error. So, be careful while executing the critical process.

 

  1. Use the “Startup Repair” option.

 

  • Create a bootable windows drive and insert it into the PC.

 

  • Reboot to the bootable Windows installation media and Click the “Next” button.

 

  • Click on the “Repair your computer” option.

 

 

 

How to solve the Windows 10 blue screen of death stuck at 100% complete

 

 

 

  • Click on the “Troubleshoot” button.

 

 

 

How to solve the Windows 10 blue screen of death stuck at 100% complete

 

 

 

  • Now, click on the “Advanced boot options” button.

 

 

 

How to solve the Windows 10 blue screen of death stuck at 100% complete

 

 

 

  • Select the “Startup Repair” button from the options.

 

 

 

How to solve the Windows 10 blue screen of death stuck at 100% complete

 

 

 

  • Then, choose the target operating system to fix, and it will start automatically repairing your Windows and will restart automatically.

 

This fix should work if you fail to boot to the Windows log-in screen because of the blue screen error and experience a random boot loop.

 

  1. Boot into Safe Mode.

 

  • Insert a bootable Windows USB stick or DVD into your PC.

 

  • Reboot to the bootable Windows Drive.

 

  • Click on the “Repair your computer” just like solution 1.

 

  • Choose the “Troubleshoot” from the options.

 

 

 

How to solve the Windows 10 blue screen of death stuck at 100% complete

 

 

 

  • Click on the “Advanced options.”

 

 

 

How to solve the Windows 10 blue screen of death stuck at 100% complete

 

 

 

  • Pick the “Startup Settings” from the window options.

 

 

 

How to solve the Windows 10 blue screen of death stuck at 100% complete

 

 

 

  • Click on the “Restart” button.

 

 

 

How to solve the Windows 10 blue screen of death stuck at 100% complete

 

 

 

  • Press the “F4” key on your keyboard to boot into Safe Mode.

 

Once you booted on the Safe Mode. Check whether the problem still exists or not. If the issue is still there, try following the methods below.

 

  1. Use the SFC (System File Checker) and DISM

 

These two methods may help solve the blue screen of death error on Windows 10 and Windows 11. This part is slightly technical. So, follow the instructions properly.

 

3.1. Perform an SFC Scan

 

  • Click on the “Start” button on your Windows PC and type cmd in the search box.

 

 

 

How to solve the Windows 10 blue screen of death stuck at 100% complete

 

 

 

  • Once the Command prompt is launched, type “sfc/scannow” and press Enter.

 

 

 

How to solve the Windows 10 blue screen of death stuck at 100% complete

 

 

 

The scanning process may take up to 15 minutes. So, keep patience until it finishes. Once the scan is done, restart your PC and check whether the issue is still there or not.

3.2. Perform a DISM Scan

 

  • Open Command Prompt on your Windows PC just like the above method.

 

  • Type “DISM/Online/Cleanup-Image/RestoreHealth.”

 

 

 

How to solve the Windows 10 blue screen of death stuck at 100% complete

 

 

 

  • The DISM may also take some time to complete, like the SFC.

 

  1. Change the Memory Dump settings.

 

  • Click on the “Start” button on your Windows 10 computer.

 

  • Search for “View advanced system settings” and click and open it.

 

 

 

How to solve the Windows 10 blue screen of death stuck at 100% complete

 

 

 

  • Once it opens, click on the “Advanced” tab and select the Settings under Startup and Recovery option,

 

 

 

How to solve the Windows 10 blue screen of death stuck at 100% complete

 

 

 

  • Uncheck the “Automatically restart” option and select the “Complete memory dump” option.

 

 

 

How to solve the Windows 10 blue screen of death stuck at 100% complete

 

 

 

  • Save changes and reboot your PC.

 

  1. Perform a System Restore

 

  • Click on the “Start” Button

 

  • Search for System Restore and open it.

 

  • Click on the “System Restore” under the System Properties windows.

 

 

 

How to solve the Windows 10 blue screen of death stuck at 100% complete

 

 

 

  • Click on the “Next” button.

 

 

 

How to solve the Windows 10 blue screen of death stuck at 100% complete

 

 

 

  • Then, click on the “Show more restore points” and choose the restore point.

 

 

 

How to solve the Windows 10 blue screen of death stuck at 100% complete

 

 

 

  • Now, click on the “Next” button.

 

  • Follow the on-screen instructions to complete the System Restoration process.

 

The System Restore tool will restore the previous state of your Windows PC and fix Windows various issues. So, once the process finishes, check whether the blue screen of the death issue is fixed or not.

 

Final Words

 

So, that was all on how to solve the Windows 10 blue screen of death stuck at 100% complete, and the computer didn’t respond. Hopefully, you found this article helpful and have learned how to solve the Windows 10 blue screen of death error.

 

If the five methods above didn’t work for you, you should perform a clean Windows installation and set up your PC. But remember, it will wipe everything, and you will lose your data on your PC.

 

FAQs

 

  1. How do I fix a blue screen on Windows when it’s stuck?

 

There are several ways to fix a blue screen on Windows. Our article discussed five effective methods to solve a blue screen error. Follow the methods; hopefully, you will fix it yourself.

 

  1. Is it okay to force the shutdown of the blue screen?

 

In case of a blue screen of death, you should keep patience and let it complete. Though you can perform a forced shutdown, it won’t make any adverse impact on your PC.

 

  1. Can RAM cause a blue screen?

 

Yes, a faulty RAM can cause many unexpected errors on your PC, including a blue screen error.

 

 

You may also be interested to know:

 

how to enable wsd in windows 10

how do i record a video of myself on windows 10

how to bypass admin restrictions windows 10

what is windows 10 version 1909

how to enable vt windows 10

Leave a Reply

Your email address will not be published.